What can we do
Mold Design:
For sand casting, the mold is made of wood or other metal materials. In this process, we asked our engineers to make the mold size slightly larger than the finished product, and the difference is called the shrinkage allowance. The purpose of this is to melt the metal into the mold to ensure that the molten metal solidifies and shrinks, thereby preventing voids in the casting process.
Core Making:
The core is formed by casting resin sand into a mold to form a casting of the inner surface. Therefore, the gap between the core and the mold eventually becomes a casting.
Casting Producing:
A mold is required during the smelting process. Molding typically involves the support frame of the mold, which is pulled out to separate during the casting process, where the previously placed core melts in the mold and then closes the die opening.
Cleaning & Machining:
The purpose of cleaning is to remove sand, sand and excess metal in the casting. Welding, sand removal can improve the appearance of the casting surface by burning the sand and the scale is removed to improve the appearance of the surface of the casting. Excess metal and other risers are removed. A step further by welding and grinding. Some castings are subject to special post-processing requirements such as heat treatment, shaping, anti-rust treatment, roughing, etc.
Finally, Checking the defects and comprehensive quality finishing, before processing, and then re-processing, according to the requirements of different customers, we can do heat treatment, surface treatment, additional inspection and so on.
Packing & Delivery
1. For smaller products, we will wrap the foam cotton and put it in the carton.
2. For larger products, we will stack layers, while each product is covered with foam cotton and then packed with a bubble film as a whole.
FAQ
Q: Are you trading company or manufacturer ?
A: We are manufacturer and provide both moulding and casting production for our global clients. From aluminum casting, sand casting and gravity casting to injection moulds, dia casting moulds for other manufacturers and industrial clients, we has been manufacturing both consumer product accessories and industrial hardwares for our global clients using aluminum alloy casting.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 20-30 days if the goods are custom made, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: We can’t provide free samples and will charge sample fee according to the actual product value.
Q: What is your terms of payment ?
The payment methods we accept are Paypal (less than $1000) and International Wire Transfer.
Payment Terms: T/T; Payment Terms: Mold Payment Terms: 100% up on confirmation; Part Payment Terms: 30% – 70%; Full payment before shipment for small orders; For large transactions, 30% Deposit before mass production, and 70% before shipment)
